Table of Contents
Advertisement
Settings
The following table summarises the product settings:
Option
Values
The fan is:
used as necessary, never used
Distance measurement:
feet/inches, metres
Do your subs play to 20Hz?
No, THX Ultra2/yes
Boundary Gain Compensation:
off, on
Rear speaker separation
<12"/0.3m, 12-48"/0.3-1.2m,
>48"/1.2m
Timeout to Home buttons:
on, off
Diagnostic displays:
on, off
Is the C61R IR Controller?
Auto, Controller, Not Controller
Main System Address
1-8
Product Address
1-8
To toggle the IR mode
• If necessary press On/Off to put the surround controller into
standby.
• Press More.
The display shows:
Description
Specifies how the optional temperature controlled fan
operates.
Units for displaying and entering distances.
Subwoofer frequency response.
Reduces the bass to compensate for listening positions close
to a wall.
Separation between rear speakers; only available when there
are four surrounds.
Whether the soft keys revert to the home keys after a delay.
Whether diagnostic displays are shown.
Whether the product is the infra-red controller for the system.
Advanced setting (normally 1).
Advanced setting (normally 1).
• Press IR to toggle between IR Auto (auto setup), IR Con.
(controller), and IR N.Con. (not controller).
After a short delay the surround controller will return to standby.
C o n f i g u r i n g t h e
d i g i t a l s u r r o u n d
c o n t r o l l e r
Advertisement
Table of Contents
