Table of Contents
Advertisement
The following dialogue box allows you to select which channels
you want to repeat:
• Select the channels you want to repeat.
• Click the OK button to confirm your selection.
The following dialogue box warns you that the existing
measurements will be overwritten:
• Click the Yes button to continue, or the No button to retain the
existing measurements.
The following dialogue box then indicates how long the selected
measurements will take, and gives you an opportunity to leave the
room before the test sequence begins:
To create multiple measurements
You can create additional measurement sets to take account of
different configurations of the room, such as with curtains open or
closed.
• Right-click the Measurements tab, then click New on the
context menu.
A new measurement set will be added to the list, and the
Speakers to Measure dialogue box will be displayed to allow
you to specify which speakers you want to measure.
• Click the OK button to proceed with the measurement.
To rename a measurement set
• Right-click the measurement set, then click Rename on the
context menu, or press 2.
• Edit the name as required and press R.
To delete a measurement set
• Right-click the measurement set, then click Delete on the
context menu, or select the measurement set and press D.
R o o m
c o r r e c t i o n
Advertisement
Table of Contents
