Table of Contents
Advertisement
Editing filters
After building the filters for a profile you can edit the filters
numerically or graphically to adjust their parameters, or change the
response of each filter.
Note: This should only be attempted by users with an
understanding of filter design. It is strongly recommended that you
copy the profile first and then edit the copied profile. There is no
undo function within Edit filters.
To display the filters for a profile
• Right-click the profile in the Profiles list, then click Edit... on
the context menu, or double-click the profile in the Profiles list.
The Edit Filters window shows a numeric or graphical display of
the filters in the profile.
• Choose a channel from the Channel drop-down list to display
the filters for that channel, or choose All Channels to show all
the filters for all channels on a single display.
To view the filters numerically
• Select Numeric.
The columns give the Centre Frequency (Hz), Gain (dB), Filter
Bandwidth (Hz), Room Mode Bandwidth (Hz), Equalized Bandwidth
(Hz), RT 60 (s), Target RT 60 (s), and Channel:
The fields on the left of the filters list allow you to adjust the
Frequency, Gain, and Width of the currently selected filter.
R o o m
c o r r e c t i o n
Advertisement
Table of Contents
