Table of Contents
Advertisement
M e r i d i a n
C o n f i g u r a t i o n
Installing and running the Meridian Configuration Program
P r o g r a m
Requirements
To use the Meridian Configuration Program you need:
• A computer running Windows 95, 98, 2000, NT 4, ME, or XP.
• 10Mbytes of free disk space.
The Meridian Configuration Program communicates with the
products you are setting up via a serial cable. The computer you are
using needs to have a nine-pin serial port available, or you can use
a USB/serial adaptor.
Alternatively some G Series products include a USB port, in which
case the Meridian Configuration Program can communicate with
them via a USB cable connected to the computer's USB port.
The software requires a mouse or similar pointing device – it
cannot be operated solely from the keyboard.
To install the Meridian Configuration Program
• Insert the Meridian Configuration Program Installation CD-ROM.
The Setup program should run automatically when the CD-ROM is
inserted. If not, locate setup.exe on the CD-ROM and run it.
The Setup program Welcome page will be displayed.
• Follow the wizard.
On the Preferences page:
• Leave Install for all users selected, unless you want to restrict
use of the program to yourself on a multi-user machine.
Running the Configuration Program
• Click Start, point at All Programs, Meridian, then click
Configuration Program:
The Welcome page will be displayed. This provides links to useful
information.
Advertisement
Table of Contents
