Table of Contents
Advertisement
measurements and profiles and store these to the digital surround
controller, the old profiles will be overwritten.
• Change the settings as required and store the new settings to
the digital surround controller.
For more information about changing configuration settings using
the Meridian Configuration Program refer to the Installation Guide
for your product.
To change other settings directly on the digital surround
controller
For information about changing other configuration settings on the
digital surround controller refer to the Installation Guide for your
product.
After making changes on the digital surround controller you can
add these changes to an existing MSL file as follows:
• Run the Meridian Configuration Program and open the original
MSL file.
• On the Products page, right-click the controller, then click
Fetch... on the context menu to fetch the new settings from the
digital surround controller.
If you want to keep the original settings:
• On the File menu, click Save as to save a copy of the MSL file.
R o o m
c o r r e c t i o n
Advertisement
Table of Contents
