Table of Contents
Advertisement
Quick tour
This section gives complete step-by-step instructions for creating a
complete configuration for a typical simple system. Even if this does
not correspond to your own system we recommend you follow
the tutorial to give you a quick tour of the Meridian Configuration
Program.
At each stage the Quick tour shows information in grey tinted
boxes about the more advanced features of the program, and the
additional options for configuring 800 Series products.
Using the Meridian Configuration
Program
The simplest way to use the Meridian Configuration Program is to
click the links in the Breadcrumb Trail and Information Bar at the
top of the window; for example:
The Breadcrumb Trail shows a sequence of hyperlinks to pages you
have already visited; this is indicated by the blue underline. Clicking
one of the links takes you to the corresponding page to allow you
to check your settings on that page, or make changes. The last
entry on the Breadcrumb Trail is usually Next, which takes you to
the next page.
The Information Bar provides help about the current page, and
tells you what to do next. The Information Bar contains two types
of hyperlink: definitions, prefixed by a question mark icon, which
display a pop-up window with a definition of the item, and jumps,
prefixed by an arrow icon, which perform an action or jump to
another page.
Starting a configuration
To start creating a configuration from the Welcome page:
• Click the Next link in the Breadcrumb Trail:
The Products page will then be displayed. This allows you to
define the products in your system and indicate how they are
connected together.
Getting help
For more detailed information about the Meridian Configuration
Program see the on-line help. To display the help:
• On the Help menu, click Configuration Program Help.
M e r i d i a n
C o n f i g u r a t i o n
P r o g r a m
Advertisement
Table of Contents
