Changing The Display And Balance - Meridian 502 User Manual

Changing the display and balance

To change the display
Press Display.
Each time you press Display the display will step between the
following options:
Display option
Source and volume.
This is the usual display.
Blank.
Remote source display
(two-room only).
To change the balance
You can adjust the sound balance on the 502 Analogue
Controller using the following procedure.
Note: The balance can only be adjusted with the remote.
Example
R a d i o 6 5
The display will show the number
of dBs added to the left channel:
1 9 7 . 9
The display will show the number
of dBs added to the right channel:
The display will show:
Press < (remote) to move the sound to the left.
Press > (remote) to move the sound to the right.
Press V (remote) to centre the balance.
Bal. <1
Bal. 9>
Bal. <0>
11