Table of Contents
Advertisement
0
R o o m
Viewing and repeating measurements
c o r r e c t i o n
The Measurements tab shows a list of the measurement sets you
have created. Each measurement set shows the channels measured
for each of the speaker layouts set up in the digital surround
controller configuration:
You can also create additional measurement sets; for example to
cater for different furniture layouts. For each measurement you can
view the effect of applying different profiles.
The Measurements tab gives you the option of viewing
or comparing the measurements. You can also repeat the
measurements for individual speakers; for example, if an external
noise interfered with the test procedure.
To view the measurements
• Right-click the measurement you want to view, then click View
Plot on the context menu, or double-click the measurement:
The Plot Measurement window allows you to see the
measurement for the specified channel:
• Select the profile from the Profile drop-down list.
To show the uncorrected response select Bypassed.
You can compare the effect of two Profile settings on the same
plot by clicking one of the split pane buttons:
Advertisement
Table of Contents
