Table of Contents
Advertisement
4. Select
U
NCONFIG
Hit Menu to Unset Device Name.
5. Press
MENU
Bus Devices list, where the temp you unconfigured (Water Temp) will
be listed as Uncfg Temp.
6. Highlight
O
options menu will appear.
7. Select
R
ECONFIG
Highlight
W
ATER
Devices list.
8. Highlight
U
appear: Hit Menu to Cfg Temp Sns.
9. Press
MENU
and press
MENU
the two sensor will be listed with their new configurations.
If desired configuration name available:
1. Press
MENU
press
.
MENU
2. Highlight
B. D
list.
3. Highlight
W
will launch the Configuration Options menu.
4. Select
R
ECONFIG
Highlight
O
UTSIDE
Devices list, where the temp will now be shown as Out T. (Outside
Temp).
EP-10 Fuel Flow Configuration
The LMF-200 can support up to three engines with one fuel flow sensor
for each engine. If you have one configured fuel flow, it will be
displayed as Eng FFlow. For a three-engine system, the fuel flows will
be displayed as Port FFlow (Port Fuel Flow), Cen FFlow (Center Fuel
Flow) and Stbd FFlow (Starboard Fuel Flow).
Each fuel flow has an internal menu with the following options: Unset
Engine, Change Engine (multiple engines only), Fuel Warning, Reset
and Reset Calibration. We will address Reset Calibration in the
calibration portion of this section.
NOTE:
If, after configuring, unconfiguring or reconfiguring a fuel flow, it is
not shown on the Bus Devices list, you will have to refresh the Bus
and press
to unconfigure the sensor and be directed back to the
(Outside Temp) and press
T
UT
and press
and press
and press
C
T
N
FG
EMP
to be taken to the Selecting Temp menu. Choose
. You will be taken back to the Bus Devices list, where
, use the
UP
and press
EVICES
on the Bus Devices list and press
T
TR
EMP
and press
and press
. The following message will appear:
MENU
to open the Selecting Temp menu.
MENU
. You will be taken back to the Bus
MENU
MENU
and
keys to select
DOWN
, which will open the Bus Devices
MENU
to open the Selecting Temp menu.
MENU
. You will be taken back to the Bus
MENU
35
. The configuration
MENU
. The following message will
S
O
UTSIDE
and
S
YSTEM
ETUP
, which
MENU
Hide quick links:
Advertisement
Table of Contents
