Economy Speed (Eco Spd); Fuel Remaining Source (Frem Src) - Lowrance LMF-200 Installation And Operation Instructions Manual

Multi-function gauge

Hide thumbs Also See for LMF-200:

Installation and operation instructions manual (44 pages)

Table Of Contents

Table of Contents

To use Partial Fill:

1. Press

press

. Highlight

2. Highlight

appear with up to three options: Port, Center and Starboard. (If you

have one tank, you will be taken directly to the Fuel Quantity window.)

Select the desired engine and press

NOTE:

When using the Partial Fill command, you will only be able to input

an amount of fuel less or equal to the fuel used figure. The unit will

not allow you to input a fuel amount greater than the fuel used

figure.

3. The Fuel Quantity window will appear. Use the

to enter the amount of fuel you added to the tank and press

will be taken back to the main display.

Economy Speed (Eco spd)

The Economy Speed menu allows you to choose what speed source the

LMF-400 will use to calculate Fuel Economy. A NMEA 2000 GPS

module, like the LGC-2000, measures ground speed The EP-25

Paddlewheel and NMEA 2000 Pitot Tube measure water speed.

NOTE:

Ground Speed is the default speed source for Fuel Economy.

To change Economy Speed Source:

1. Press

press

. Select

2. Highlight

menu. The menu has three options: Water Spd (Water Speed), Pitot

Speed and Gnd Spd (Ground Speed). A NMEA 2000 GPS module

measures ground speed, while a paddlewheel, like the EP-25 measures

water speed.

3. Select the desired speed source and press

back to the main display.

Fuel Remaining Source (FRem Src)

The Fuel Remaining source function allows you to select the device

used to measure the amount the fuel remaining in the tank.

NOTE:

If you plan to use a fluid level sensor for a fuel tank, you must

switch the fuel remaining source to Fuel Level. If you want to use

the EP-10 Fuel Flow, EP-50 Storage Device or the NMEA 2000

Suzuki Engine Interface to measure fuel remaining, select

Engine/FFlow from the Fuel Remaining Source menu.

, use the

UEL MNGR

and press

ART

ILL

, use the

UEL MNGR

and press

CO SPD

and

keys to select

DOWN

and press

. The Select Tank menu will

and

keys to select

DOWN

and press

, which will open the Eco spd

YSTEM

and

YSTEM

, which will take you

and

ETUP

keys

DOWN

. You

and

ETUP

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

Economy Speed (Eco Spd); Fuel Remaining Source (Frem Src) - Lowrance LMF-200 Installation And Operation Instructions Manual

Economy Speed (Eco spd)

Fuel Remaining Source (FRem Src)

Hide quick links:

Related Manuals for Lowrance LMF-200

Related Content for Lowrance LMF-200

Table of Contents