Table of Contents
Advertisement
Fill up your tank again, noting how much fuel you added to the tank.
Compare that number to the Fuel Used figure displayed on the page
you customized. If the amount of fuel you added to the tank and the
fuel used figure are off by more than 3 percent, we recommend the
engine interface be calibrated.
NOTE:
You must use the gauge's Refill Tank command when filling your
fuel tank to keep the engine interface updated with correct
information on the amount of fuel in the tank.
Refill Tank
You will use the Refill Tank option each time you calibrate an engine
interface and every time you refill your tank, regardless of whether you
choose to calibrate.
To calibrate a Suzuki Engine Interface (Refill Tank):
Add the Fuel Manager page or any of the digital gauge pages to the
page screen rotation, then customize the selected page to show Fuel
Used data. To see instructions on how to Add Pages and Customize
Pages, refer to the Operation Section.
1. Fill up the fuel tank connected to the engine interface you want to
calibrate. Press
and press
MENU
2. Highlight
F
The Select Tank menu will open with up to three options: Port, Center
and Starboard.
3. Select the tank you refilled and press
(ReCal?) menu will appear with two options: Yes and No. Select
press
. The following message will appear: Hit Menu if Tank filled
MENU
up.
4. Press
MENU
NOTE:
Make sure the Fuel Management page has been added to the main
display and that the page has been customized to show USD (Fuel
Used). If the Fuel Management page is not displayed or if it is not
customized to display USD (Fuel Used), refer to the Add Pages and
Customizing Pages segments in the Operation section.
5. Take your boat out, but only use ONE engine — the engine
connected to the engine interface. Burn at least 5 gallons of fuel, then
fill up the tank again, noting how much fuel was added to the tank.
Check the Fuel Management page for the fuel used figure calculated by
the Suzuki Engine Interface.
, use the
MENU
.
and press
UEL MNGR
, which will direct you to the main display.
and
UP
DOWN
. Select
MENU
55
keys to select
. and press
R
T
EFILL
. The Recalibration
MENU
S
S
YSTEM
ETUP
.
MENU
and
N
O
Hide quick links:
Advertisement
Table of Contents
