Ep-15 Fluid Level Calibration; 2-Point Calibration - Lowrance LMF-200 Installation And Operation Instructions Manual

Multi-function gauge
Table of Contents

Advertisement

(Center) and Stbd (Starboard). Select the tank you refilled and press
. The Fuel Quantity window will appear.
MENU
3. Use the
UP
the tank and press

EP-15 Fluid Level Calibration

The default calibration for the EP-15 Fluid Level is just as accurate as
standard fluid level gauges. If, however, the tank has an irregular
shape or greater accuracy is needed, calibration is recommended. The
EP-15 Fluid Level has three calibration options: 2 point, 3 point and 5
point.

2-Point Calibration

A 2-point calibration is best suited for rectangular or square-shaped
tanks, where the capacity of the top half of the tank matches the
capacity in the lower half of the tank. In a two-point calibration, you
will set two points, one each for empty and full levels. You can begin
calibration at either of the two points, but we recommend starting with
an empty tank. You will fill the tank to complete calibration.
To execute 2-Point calibration:
1. Press
MENU
2. Highlight
Devices list.
3. Highlight the fluid level sensor you want to calibrate and press
, then select
MENU
will appear with three options: 2, 3 and 5.
4. Select
and press
2
options: Empty Lev and Full Lev.
NOTE:
You DO NOT have to calibrate both points to complete the
calibration and you can calibrate the points (Empty Level and Full
Level) in any order you wish. Remember: Points that are not
calibrated will not be as accurate as points that have been
calibrated. For the greatest accuracy, we recommend both points be
calibrated.
5. Make sure the tank is empty, then select
menu and press
Menu. Press
MENU
6. When the tank has been filled, follow steps 1-4 to access the Points
menu. Highlight
appear: Tnk to Full lev hit Menu. Press
out, which will take you to the main display.
and
keys to input the amount of fuel you added to
DOWN
. You will be directed to the main display.
MENU
, select
S
YSTEM
and press
B. D
EVICES
(Calibrate) and press
C
AL
MENU
. The following message Tnk to Empty lev hit
MENU
and fill up the tank.
and press
F
L
ULL
EV
and press
S
ETUP
MENU
. The Points menu will appear with two
MENU
MENU
51
.
MENU
, which will open the Bus
. The Points menu
MENU
from the Points
E
L
MPTY
EV
. The following message will
and let the menus time

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents