Lowrance LMF-200 Installation And Operation Instructions Manual page 52

If all interfaces configured (Configuration name unavailable):
1. Press
MENU
press .
MENU
2. Highlight
B. D
3. Select Port Eng and press
4. Highlight
U
appear: Hit Menu to Unset Dev Name.
5 Press
. MENU
where engine interface (formerly Port Eng) now will be displayed as
UnCfg Eng. Remember: If the engine interface you just unconfigured is
not shown on the Bus Devices the list, you will have to refresh the list.
Let the Bus Devices list time out then access it again.
6. Highlight
S
which will open the Select Engine menu with up to three options
MENU,
(Port, Center
configuration you selected.
. Highlight
7 P
You will be taken back to the Bus Devices list, where the engine
8.
interface you selected (formerly Stbd Eng) will now be shown as Port
Eng. If the newly configured interface is not shown, refresh the Bus
Devices list.
9. Now, select
appear: Hit Menu to Cfg Eng Int. Press
10. The Suzuki Engine Model menu will appear with the following
options: DF40, DF50, DF60, DF70, DF90/115, DF140, DF150, DF175,
DF200/225, DF250 and DF300. Select your engine from the list and
press .
MENU
11. The Select Engine menu will appear with up to three options: Port,
Center and Starboard. Highlight Starboard and press
be taken back to the Bus Devices list where the engine interface now
will be displayed as Stbd Eng. If the newly configured interface is not
shown, refresh the Bus Devices list. (If you have a single-engine
configuration, you will not be taken to the Select Engine menu. You
will be returned to the Bus Devices list.)
If desired configuration name available:
1. Press
MENU
press .
MENU
2. Highlight
appear.
, use the
UP
and press MENU
EVICES
and press
E
NSET NGINE
and you will be taken back to the Bus Devices menu,
and press
E
TBD NG
and Starboard),
and press
ORT
and press
U C E
N FG NG
, use the
UP
and press
B. D
EVICES
and keys to select
DOWN
. The Bus Devices list will appear.
.
MENU
MENU
Select
MENU.
depending
MENU.
MENU.
MENU
and keys to select
DOWN
MENU
46
S
YSTEM
. The following message will
C E
HANGE
on the
The following message will
.
S
YSTEM
. The Bus Devices list will
and
S
ETUP
and press
NGINE
engine-tank
. You will
MENU
and
S
ETUP