Table of Contents
Advertisement
4. Press
MENU
calibration information to the default settings. You will be taken back
to the Bus Devices list where the selected fluid level will be displayed
as UnCfg FL.
WARNING:
If you reset any individual EP sensor, it will lose all
configuration and calibration settings.
Suzuki Engine Interface Configuration
The LMF-200 can support up to three engines with one engine
interface for each engine. If you have one configured engine interface, it
will be displayed as Eng Int. If you have three configured fuel flows,
they will appear as Port Eng, Cen Eng and Stbd Eng. When the
interface is unconfigured it will be shown as UnCfg Eng.
Each fuel flow has an internal menu with the following options: Unset
Engine, Change Engine. Fuel Warning, Reset and Reset Fuel
Calibration and Reset Trim Calibration.
NOTE:
If, after configuring, unconfiguring or reconfiguring an engine
interface, it is not shown on the Bus Devices list, you will have to
refresh the list. To do this, let the menu time out and press
Select
S
YSTEM
. The Engine Interface will be listed with its new
MENU
configuration setting.
To configure Suzuki Engine Interface:
1. Press
MENU
press
.
MENU
2. Highlight
appear.
3. Select
U
C
N
FG
Hit Menu to Cfg Eng Int. Press
4. The Suzuki Engine Model menu will appear with the following
options: DF40, DF50, DF60, DF70, DF90/115, DF140, DF150, DF175,
DF200/225, DF250 and DF300.
5. Select your Suzuki model engine from the list and press
Select Engine menu will appear with up to three options: Port, Center
and Starboard. (If you have a single-engine configuration, you will not
be taken to the Select Engine menu. You will be taken back to the main
display.)
to reset the selected fluid level's configuration and
and press
S
ETUP
, use the
UP
and press
B. D
EVICES
and press
E
NG
. Highlight
MENU
and
keys to select
DOWN
MENU
. The following message will appear:
MENU
.
MENU
44
B. D
EVICES
S
YSTEM
. The Bus Devices list will
.
MENU
and press
and
S
ETUP
. The
MENU
Hide quick links:
Advertisement
Table of Contents
