Table of Contents
Advertisement
NOTE:
You DO NOT have to calibrate all five points to complete the
calibration and you can calibrate the points (Empty Level, 1
Quarter Level, Half Level, 3 Quarter Level and Full Level) in any
order you wish. Remember: Points that are not calibrated will not be
as accurate as points that have been calibrated. For the greatest
accuracy, we recommend all five points be calibrated.
To execute 5-Point calibration:
1. Press
MENU
2. Highlight
Devices list.
3. Highlight the fluid level sensor you want to calibrate and press
, then select
MENU
will appear with three options: 2, 3 and 5.
4. Select
and press
5
options: Empty lev, 1 Qtr lev, Half lev, 3 Qtr lev and Full Lev.
5. Highlight
appear: Tnk to Empty lev hit Menu. Press
of the tank. If you had a 100 gallon tank, you would add 25 gallons.
6. Repeat steps 1-4, then select
press
. The following message will appear: Tnk to 1 Qtr lev hit
MENU
Menu. Press
MENU
tank, you would add another 25 gallons.
7. Repeat steps 1-4 to access the Points menu, then highlight
and press
MENU
Menu. Press
MENU
100 gallon tank, you would add another 25 gallons.
8. Repeat steps 1-4 to access the Points menu, then highlight
and press
MENU
hit Menu. Press
tank, you would add another 25 gallons.
9. Repeat steps 1-4 to access the Points menu, then highlight
and press
MENU
Menu. Press
MENU
the main display.
Reset Calibration
The Reset Calibration command allows you to reset a fluid level's
calibration settings back to factory defaults. You should only
recalibrate when you believe your EP-15 Fluid Level calibration is
incorrect.
, select
S
YSTEM
and press
B. D
EVICES
(Calibrate) and press
C
AL
MENU
and press
E
L
MPTY
EV
and fill up the tank halfway. If you had a 100 gallon
. The following message will appear: Tnk to Half lev hit
and fill up three quarters of the tank. If you had a
. The following message will appear: Tnk to 3 Qtr lev
and fill up the tank. If you had a 100 gallon
MENU
. The following message will appear: Tnk to Full lev hit
and let the menus time out, which will take you to
and press
S
ETUP
MENU
. The Points menu will appear with five
. The following message will
MENU
1 Q
L
TR
EV
53
.
MENU
, which will open the Bus
. The Points menu
MENU
and fill up one quarter
MENU
from the Points menu and
H
L
ALF
EV
3 Q
L
TR
EV
F
L
ULL
EV
Hide quick links:
Advertisement
Table of Contents
