General Safety Precautions - Siemens IP-Module User Manual

General Safety Precautions

2 General Safety Precautions
6
Siemens Building Technologies
Fire Safety & Security Products
Read these instructions carefully before connecting the camera and the IP-
Module in order to avoid damage caused by improper installation or use.
Installation may be done only by authorized personnel according to the local
safety regulations.
Operate the camera and the IP-Module only with the designated voltage.
Follow the safety instructions for the camera and for the IP-Module.
Never use the camera and the IP-Module for purposes other than those
designated.
Repairs and adjustments to the camera and the IP-Module may be done only by
authorized personnel.
If liquids or objects get into the housing, disconnect the camera and the IP-
Module from the power supply and have it checked by your authorized dealer
before using it again. (Danger of electric shock!)
This equipment has been tested and found to comply with the limits for a Class
B digital device. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment may generate, uses and can radiate radio frequency energy
and, if not installed and used according to instructions, may cause harmful
interference with radio communications.
Be aware that any modifications not explicitly approved in this manual may void
your equipment warranty.
The shielded interface cable recommended in this manual must be used with
this equipment in order to comply with the limits for a digital output device.