Checking Device Accessibility - Siemens IP-Module User Manual

Checking device accessibility

8 Checking device accessibility
16
Siemens Building Technologies
Fire Safety & Security Products
Your device is accessed in the network via its IP address. The IP address is either
preset at the factory (IP address 192.168.100.100) or set by you when allocating a
new IP address to your device. See section 10.1: Changing the device IP address.
1. Type the following command in the your client PC's command prompt screen:
2. ping xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx = 192.168.100.100
if the IP address set by the factory is used
xxx.xxx.xxx.xxx = the IP address you have allocated to the device;
e. g. 141.73.31.3.
3. Press the Enter key.