Configuring Network Settings - Siemens IP-Module User Manual

Table of Contents

Advertisement

Configuring network settings

10
Configuring network settings
20
Siemens Building Technologies
Fire Safety & Security Products
1. Call up the device homepage. See section 9.1: Calling up the device homepage.
2. Select Network settings in the Configuration menu.
The Network settings dialogue window opens:
Network settings
Fig. 4
3. Enter the desired settings in this dialogue window.
4. The settings are described in detail below.
5. Click on Save.
6. Restart your IP-Module. See section 14: Restarting the IP Module.
The network settings will be adopted.
Firmware Version
Hostname
Automatic network
configuration (DHCP)
IP-Address
Subnet mask
Display of the Firmware Version
The hostname entered here appears in the Web Cam IP Manager as
the name of the device. See section 9.1.2: Calling up the device
homepage using the Web-Cam IP Manager.
If you activate automatic network configuration, a DHCP or BOOTP
server will automatically allocate an IP address, a subnet mask and a
gateway to your device. See section 9.1.1: Changing the device IP
address via the device homepage.
Enter the device IP address in this box. See section 9.1.1: Changing
the device IP address via the device homepage.
Enter the device subnet mask in this box. See section 9.1.1: Changing
the device IP address via the device homepage.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ip-module cfva-ipIp-module cvva-ip

Table of Contents