Configuring Jpeg Encoder Settings - Siemens IP-Module User Manual

11.3

Configuring JPEG encoder settings

Siemens Building Technologies
Fire Safety & Security Products
Overlay text
Overlay text position
Overlay text color
The live video image can be displayed at the following resolutions:
Low
Standard
High
You can allocate a quality level to each resolution.
The table below shows guideline values in kilobytes for the size of data stream
required for image transmission. The size of the data stream depends on the
resolution setting and the chosen quality level.
Image size Low quality
176 x 144 4 KB
352 x 288 9 KB
704 x 576 26 KB
The values shown relate to a color image of average complexity.
1. Call up the device homepage. See section 9.1: Calling up the device homepage.
2. Select Image parameters in the Configuration menu.
The Image parameters dialogue window opens:
You can select the parameters that are to be overlaid on the live video
image here.
The following options are available:
– (no text overlay)
Time
Time and date
Video source
Video source and time
Video source + time + date
You can select the position of the text overlay on the live video image
here.
The following options are available:
Top left
Top right
Bottom left
Bottom right
Choose the color for the text overlay here.
The following options are available:
White
Yellow
Pink
Red
Turquoise
Green
Blue
Black
Medium quality
5 KB
11 KB
37 KB
Configuring image parameters
High quality
12 KB
34 KB
137 KB
25