Table of Contents
Advertisement
Parameters
Security profile
You should define the
dard is connected to a HiPath 5000 system.
Three settings are available:
•
•
•
Security window (seconds)
A time window is used if the IP phone is connected to a HiPath 5000 sys-
tem and
cepts messages from the
time window. The highest value you can enter here is 120 minutes.
Server type
In the list field, specify the communication system. The following options
are available:
•
•
•
•
The default is Other.
Session Duration (minutes)
Enter a maximum duration in minutes for a session here.
Session Timer
Switches the SIP Session timer on and off. The timer controls the dura-
tion of a session.
Silence Suppression
The option can be enabled or disabled.
SIP Gateway Adress
Enter the
SIP Gateway Port
Enter the
66
off (voice encryption is disabled).
reduced (voice encryption on one side only –
data sent).
on (voice encryption on both sides –
encrypt data sent)
Security profile is activated (reduced or on). The tool only ac-
Other
HiQ8000
Broadsoft
Sylantro
IP Address of the SIP gateways if gateway mode is in use.
Port number for communicating with the SIP Gateway.
Security protocol setting if the optiPoint 400 stan-
IP phone and
Gatekeeper that arrive within the defined
Gatekeeper encrypts
Gatekeeper
Advertisement
Chapters
Table of Contents
