Table of Contents
Advertisement
Layer 2 Priority
•
You can only set this if
•
You can set a priority value between 0 and 7 for each of the 64 positions
here (priority 7: high, 0: low).
•
This additional data transmission information is used for forwarding pri-
ority decisions when data arrives in a
LDAP Server Addr
Also known as "LDAP Directory Server IP address" or "Server address".
•
This can only be configured for optiPoint 600 office and optiPoint 410
standard/advance HFA.
•
If you are using an
er here.
LDAP template name
•
Enter the name of the LDAP template file that is used in connection
with the
LDAP server.
•
The file must be saved on the
(
Download Server IP Address,
LDAP folder
Name of the directory on the
file.
LDAP Server Port Number
•
Also known as Port Number. This can only be configured for
optiPoint 600 office and optiPoint 410 standard/advance HFA.
•
If you are using a
communication with this server.
•
Possible values: 1 ... 65535.
Line Key action mode
Reserved for future function.
Location code
Enter the location code (the call number without extension number,
for example, of your company).
Location ID number
Contains the name or number saved for the phone on the server. This is
automatically entered in optiPoint and output on the display (also known as
local id). If a name is not available, the Location identifier number (LIN) is
output on the display.
Layer 2 support is active (
LDAP server, enter the
FTP server in a specific directory
File path).
FTP server where you saved the
LDAP server, enter the
QoS L2/L3).
Switch.
IP Address of this serv-
Port number here for
Parameters
LDAP
61
Advertisement
Chapters
Table of Contents
