Stopping A Scan; Resetting The Scan Result - Siemens HIPATH V1.2.33 Administrator's Manual

Optipoint ip phones deployment tool

Table of Contents

Listing Connected IP Phones

Device type

The Device type column lists the optiPoint devices each with an assigned

icon. This column could look as follows in another network:

If you hid the Device type column (

ent device types, the following message will prompt you to display the col-

umn after the scan:

If you do not display the Device type column, you will be unable to config-

ure any devices as the Configure Selected Devices function will not be

available

Stopping a Scan

You can interrupt a scan at any time. Call with Stop from the Scan menu

on the menu bar.

If the result is unsatisfactory, for example, or if you want to change or ex-

tend the IP address range, you can reset the values in the current device

list. Call with Reset from the Scan menu on the menu bar.

page 17.

page 11) and the list contains differ-

Table of Contents

Table of Contents