Listing Connected Ip Phones - Siemens HIPATH V1.2.33 Administrator's Manual

Listing Connected IP Phones

Listing Connected IP Phones
You must identify the phones you want to configure in the Deployment
Tool before you can proceed with configuration. A scan function searches
the network and creates a list of devices found. You can scan for an IP
phone on the basis of its IP address or you can scan an IP address range
for optiPoint phones.
When you activate the Deployment Tool, a blank Device List appears if you
have not already saved a deployment file.
If the Deployment Tool opens with the last deployment file saved, you can
create a new deployment file by selecting New from the Edit menu on the
menu bar or by entering CTRL+N. You can also load a specific deployment
file
8
page 16.
Device List window
Selection boxes
Menu bar
Toolbar
Column headers