Table of Contents
Advertisement
DSM application filename
•
Can only be configured for optiPoint 410 standard/advance and is only
necessary if you are using an optiPoint 410 Display Module.
•
Enter the name of the file containing the optiPoint 410 Display Module
software.
•
The file must be saved on the
path/folder).
•
Possible values: 1 to 24 characters.
Emergency number
Call number automatically dialed after one second.
External access code
Enter the prefix that must be entered when dialing an external call number,
for example "0".
Filename
Name under which the file you want to load is saved on the server.
File path
•
Enter the path to the directory that was set up on the
uploading and downloading files.
•
The path can contain up to 255 characters.
Fileserver address
A correctly configured
changing data using FTP . The server program must be running on a com-
puter (for example PC) in the same
the IP address of this server.
FTP account
•
Enter the
FTP user account for access to the FTP server.
•
Possible values: 1 to 24 characters.
•
Default value: blank.
FTP password
•
Enter the password that was set in the
for accessing this server. The password must be confirmed in the fol-
lowing field.
•
The password must match the
•
Possible values: 1 to 24 characters.
•
Default password: 123456.
FTP server in a specific directory (FTP
FTP server (file server) is always needed for ex-
LAN as the optiPoint device. Enter
FTP user name.
Parameters
FTP server for
FTP server as the password
57
Advertisement
Chapters
Table of Contents
