Installation Of Jw-50Fl - Sharp JW-20FL5 User Manual

Chapter 5: Installation
5-3 JW-50FL
(1) Installation of cable for option module
Install the optional cable on the basic rack panel that installed JW-50FL.
Cable type for option module
Cable for option module
* If the ZW-6CC is used, a maximum of 6 optional modules can be installed. However, a limit of
5 optional modules can be used with JW-50FL, due to a parameter (address area) setting limita-
tion.
5
Rack panel type
Model name of the rack
panel on which optional
cable is installed

(2) Installation of JW-50FL

Attach the rack panel using the two attachment screws.
Before installation or removal, make sure to shut OFF the power supply to the PC.
Phillips screwdriver
Maximum number of JW-50FL
ZW-2CC
ZW-4CC
ZW-6CC
Cable for option module
ZW-2CC
JW-4BU
JW-6BU
JW-8BU
JW-13BU
Appearance when ZW-2CC optional
cable is installed
- This module can be installed in any one of the optional slots.
Be careful not to bend the connector pins on the module by applying
too much force to them.
that can be installed
2
4
5 Note *
( : Can be installed
: Cannot be installed)
ZW-4CC
ZW-6CC
Install on rack panel JW-4BU
Module
5-8
Rack panel