Table of Contents
Advertisement
Chapter 15: Appendix
Remove the aluminum braided screen around the cable
1. Remove aluminum screen around the cable
2. Remove the aluminum tape on the cable
Strip the insulation material around the conductor.
Assemble the connector and shield parts
Shielding coaxial cables and soldering the pin.
15
* Remove all the aluminum tape on this part.
* Remove the aluminum tape at the two positions shown above.
Braided shield
Clamp
Solder coil
Gasket
Nut
PVC cap
(rubber)
(I-PCC)
15-44
Advertisement
Table of Contents
