Timeout Time For Send/Receive Instructions - Sharp JW-20FL5 User Manual

Chapter 11: SEND/RECEIVE function

11-2 Timeout time for SEND/RECEIVE instructions

Enter a timeout time for the SEND/RECEIVE functions in the parameter at address 60 .
(8)
Timeout time parameter
Address Detail
(8)
60 Timeout time for SEND/RECEIVE instructions (0.1 to 25.5 sec.)
- The specified timeout time will be effective for all target nodes.
- The allowable range is 0.01 (0.1 sec.) to 255 (25.5 sec.), in decimal notation. (In units of 0.1 sec.)
- The default value of 00 is 1 sec.
(H)
11
11-8