Flat Tuning - Korg pitchblack+ Owner's Manual

Each time you hold down the NOTE/
CENT button for approximately one
second, you will alternate between the All
Note and Octave Link edit screens.
4 Use the UP or DOWN buttons and the
NOTE/CENT button to specify the cent value
for each note in the one-octave range C–B.
The procedure and the range for the cent
value are the same as for All Note.
☞p.16 "Specifying the pitch for every note
(All Note)"
5 When you've finished editing, press the
STORE button.
The display will indicate a program number.
6 Use the UP or DOWN button to select the
program number (P1–P5) in which you want
to store the tuning program you created.
7 Press the STORE button once again.
Your tuning program will be stored, and the
pitchblack+ will return to tuning mode.
18

Flat Tuning

Flat Tuning lets you tune a number of semi-
tones lower than the note names shown in the
display. You can tune down a maximum of
seven semitones (half steps).
Flat Tuning is available when the Tuning
Mode is set to Guitar, Bass, Open D–Open
A open tuning, or DADGAD.
You can specify Flat Tuning independently
for the INPUT A and INPUT B input jacks.
When you use the INPUT SELECT switch
to change inputs, the setting will also
change automatically.
The Flat Tuning settings are stored in internal
memory. Even if you remove the battery or
disconnect the AC adapter, the
start up with the settings stored in internal
memory the next time you turn the power on.
pitchblack+
will