Korg pitchblack+ Owner's Manual page 19

1 Press the FLAT button.
The Flat Tuning indicator will blink, and the
display will show the current number of flats.
2 Use the UP or DOWN buttons to specify the
number of flats.
You can specify a number of flats in the range
of 0–7. If you specify a setting other than 0,
the Flat Tuning indicator will light.
If you decide to cancel the change you
made, press the TUNER ON/OFF switch or
press the INPUT SELECT switch to change
between A or B.
3 Press the STORE button.
The INPUT SELECT indicator will blink. If
the A and B settings are identical, the A and B
indicators will blink. If the A and B settings
differ, the indicator selected by the INPUT
SELECT switch will blink.
Flat tunning indicater
4 Use the UP button, DOWN button, or INPUT
SELECT switch to select the internal memory
in which you want to store the setting.
5 Press the STORE button once again.
The selected flat tuning setting will be stored
in the internal memory you specified, and the
pitchblack+
will return to tuning mode.
When you press the STORE button, the
calibration, tuning mode, flat tuning, and
display mode settings will all be saved at
the same time (☞p.14).
19