Korg AW-OTG, AW-OTB - Clip-On Tuner Quick Start Guide

Precautions

Location

Using the unit in the following locations can result in a malfunction.

• In direct sunlight.
• Locations of extreme temperature or humidity.
• Excessively dusty or dirty locations.
• Locations of excessive vibration.
• Close to magnetic fields.

Power supply

Be sure to turn off the power when the unit is not in use. Remove the battery in order to prevent it from leaking when the unit is not in use for extended periods.

Interference with other electrical devices

Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions.

Handling

To avoid breakage, do not apply excessive force to the switches or controls.

Care

If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use liquid cleaners such as benzene or thinner, or cleaning compounds or flammable polishes.

Keep this manual

After reading this manual, please keep it for later reference.

Keeping foreign matter out of your equipment

Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it could cause a breakdown, fire, or electrical shock. Be careful not to let metal objects get into the equipment.

Installing the battery (Fig.1)

1. Open the battery compartment cover on the rear of the tuner.
2. Insert the battery, making sure to observe the correct polarity, and then close the cover.

Attaching to the instrument (Fig.2)

Attach the AW-OTG/OTB to the headstock of your instrument.

Please carefully attach the AW-OTG/OTB to your instrument. Leaving the AW-OTG/OTB attached for a long time may damage or mark the instrument's surface. Depending on various factors such as age-related change or the surface finish, there is a possibility that your instrument may be damaged by attaching this product.

Tuning (Fig.3)

1. Press the power button (a) to turn on the AW-OTG/OTB.
2. Play a single note and tune the string.

Reference pitch settings

The default setting for the reference pitch is 440 Hz. The reference pitch can be changed. Press the CALIB button (e). While the current reference pitch appears in the display (c), press the CALIB button to change the setting.

Setting the display type

(→ Refer to the Owner's Manual.)

Each press of the DISPLAY button (b) switches the display type so you can tune using the desired display indication.

Identifying chords (AW-OTG only)

Press the TUNING/CHORD button (d) to enter chord-identifying mode. When you play a chord on your instrument, the chord appears in the display.

Identifying a tempo (AW-OTB only)

Press the TUNING/TEMPO button (d) to enter tempo-identifying mode. When you play your instrument at a steady rhythm in, for example, double time or half time, the tempo is identified and appears in the display.

Specifications (Overview)

• Power Supply: One AAA Battery (alkaline or nickel-metal hydride battery)
• Battery life: approximately 18 hours (tuner continuously operating, A4 continuous input, when using alkaline battery)
• Auto Power-off: Approximately 3 minutes
• Dimensions: 51 mm(W) x 64 mm(D) x 71 mm(H) / 2.01" x 2.52" x 2.80".
• Weight: 35 g / 1.23 oz (including the battery)
• Included items: Quick Start Guide, One AAA battery

* Specifications and appearance are subject to change without notice for improvement.

THE FCC REGULATION WARNING (for USA) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. If items such as cables are included with this equipment, you must use those included items. Unauthorized changes or modification to this system can void the user's authority to operate this equipment.

Notice regarding disposal (EU only) If this symbol is shown on the product, manual, battery, or package, you must dispose of it in the correct manner to avoid harm to human health or damage to the environment. Contact your local administrative body for details on the correct disposal method. If the battery contains heavy metals in excess of the regulated amount, a chemical symbol is displayed below the symbol on the battery or battery package.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 B / NMB-3 B.

IMPORTANT NOTICE TO CONSUMERS This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this product should be used. If you have purchased this product via the internet, through mail order, and/or via a telephone sale, you must verify that this product is intended to be used in the country in which you reside. Use of this product in any country other than that for which it is intended could be dangerous and could invalidate the manufacturer's or distributor's warranty. Please also retain your receipt as proof of purchase otherwise your product may be disqualified from the manufacturer's or distributor's warranty.

* All product names and company names are the trademarks or registered trademarks of their respective owners.

KORG INC.
4015-2 Yanokuchi, Inagi-City, Tokyo 206-0812 JAPAN

© 2017 KORG INC.

Published 07/2017 Printed in Vietnam