Troubleshooting - Korg pitchblack+ Owner's Manual

If you decide to cancel the change you
made, press the TUNER ON/OFF switch or
press the INPUT SELECT switch to change
between A or B.
3 Press the STORE button.
The INPUT SELECT indicator will blink. If
the A and B settings are identical, the A and B
indicators will blink. If the A and B settings
differ, the indicator selected by the INPUT
SELECT switch will blink.
4 Use the UP button, DOWN button, or
INPUT SELECT switch to select the internal
memory in which you want to store the
setting.
5 Press the STORE button once again.
The display mode setting will be stored in the
internal memory you specified, and the
pitchblack+
will return to the tuning state.
When you press the STORE button, the
calibration, tuning mode, flat tuning, and
display mode settings will all be saved at
the same time (☞p.14).
22

Troubleshooting

Can't tune.
• Could the tuner be off?
Press the TUNER ON/OFF switch to turn the
tuner on.
• If instruments are connected to both INPUT A
and INPUT B jacks, have you used the INPUT
SELECT switch to select the correct input for
the instrument you're tuning?
• Have you selected the appropriate tuning
mode for the instrument you're tuning?
For example if you're tuning a guitar, the note
names might not be displayed if the Tuning
Mode is set to BS (Bass).
Sound is not audible from the BYPASS jack.
• Could the tuner be on?
If the tuner is on, sound will not be audible
from the BYPASS jack. Press the TUNER ON/
OFF switch to turn the tuner off.
Power is not supplied from the DC 9V OUT jack.
• Could the pitchblack+
battery power?
Power cannot be supplied from the DC 9V
pitchblack+
OUT jack if the
battery power.
be operating on
is operating on