Korg pitchblack+ Owner's Manual page 17

3 Use the UP or DOWN button to select the
note name and octave whose cent value you
will specify.
4 Press the NOTE/CENT button to make the
cents value blink, and use the UP or DOWN
buttons to specify the cents value relative to
equal temperament.
You can edit the cents value in a range of -50–
+50 cents.
5 To continue editing, press the NOTE/CENT
button and repeat steps 3 and 4.
6 When you've finished editing, press the
STORE button.
The display will indicate a program number.
7 Use the UP button or DOWN button to
select the program number (P1–P5) in which
you want to store the tuning program you
created.
8 Press the STORE button once again.
Your tuning program will be stored, and the
pitchblack+
will return to tuning mode.
Specifying the pitch for each note in the
octave (Octave Link)
Here's how to specify the pitch for each note of
an octave.
1 In Tuning mode, select P1–P5 (PROGRAM
1–PROGRAM 5), and press the STORE
button to store the setting.
☞p.14 "Setting the Tuning Mode"
2 Press the NOTE/CENT button.
You will enter the Tuning Program Edit mode.
☞p.16 "Specifying the pitch for every note
(All Note)"
3 Hold down the NOTE/CENT button for
approximately one second.
The display will show the Octave Link edit
screen. The note name and cent value will be
displayed, and the note name will blink.
Cent value Note name
17