Korg Sound on Sound Owner's Manual page 33

TEMPO
The counter in MBQ Time mode and the rhythm
machine will use the tempo specified by this
parameter (see "Setting the tempo of the rhythm
machine" on page 23).
BEAT
This parameter sets the songʹs time signature.
SPEED
You can adjust the playback speed without
changing the pitch (Sound Stretch function).
25%: The unit plays a song at quarter speed.
ORIGINAL:
The unit plays a song at its original speed.
150%: The unit plays a song at 1.5x speed.
If you select any option other than ORIGI‐
NAL, playback sound quality will decrease.
If you want to listen to the sound at its origi‐
nal level of quality, set this parameter to
ORIGINAL.
During overdubbing, you can only make the
speed slower (25%–99%).
If you select any option other than ORIGINAL, and then overdub,
the recorder will calculate and regenerate the playback data after
recording is complete. Therefore, it may take more time until nor‐
mal operation becomes available.
Point A
Point B
These parameters enable you to set loop Points A
and B (see "Loop playback/recording" on page 19).
1. Press the button while the A POINT or B
POINT page is displayed.
The parameter setting will flash, indicating it
is available for editing.
2. Press the
through each field.
3. Press the + or ‐ button to adjust the value.
4. Press the button to confirm the setting.
If you want to cancel the settings instead,
press the Stop button.
button to move the cursor
Touch slider
Touch slider
33