5. Press the
or
volume and input level, if necessary (see "MIX BAL" on page 32).
6. Press the Record button again. The unit will start playback and record‐
ing at the same time. The Record LED indicator will light up steadily.
7. Input sound mixed with the playback sound is recorded on the mem‐
ory card.
You can also trigger recording at the moment the audio starts (see
"AT START" on page 30).
If you want to start overdubbing at a certain point in the song
while listening to the playback, press the button during Record
Ready mode to start playback. Then press the Record button at the
point you want to start recording.
8. To pause overdubbing, press the Stop button. The Record LED indica‐
tor will flash.
If you press the Record or button instead of the Stop button, the
unit will enter Record Ready mode, and playback will continue.
9. To resume overdubbing, press the Record button (the Record LED
indicator will light up). Alternatively, to finish overdubbing, press the
Stop button again (the Record LED indicator will turn off).
If you overdub beyond the end point of the first recording, the end
point of the song will be extended to the end of the overdubbed section.
Now the first layer of overdubbing is complete. To overdub more, repeat
Steps 2 through 9.
Overdubbing while playing back only a targeted portion of a song
Record Ready
Locate the
start point.
Overdubbing while playing back from the top to the end of a song
Record Ready
Start playback.
18
button to adjust the balance between the playback
Press the
Record button
Overdubbing start point
Press the
Record button
Overdubbing start point
Press the Stop button
Record Ready
Stop playback
Overdubbing
end point
Press the
Record or
button Record Ready
Playback
Overdubbing
continues
end point