Using The Tuner - Korg Sound on Sound Owner's Manual

Using the tuner

The SOUND on SOUND features a built‐in tuner. You can accurately tune
your musical instrument connected to the INPUT jack while viewing the
tuning meter displayed on the LCD.
Tuning procedure
1. Press the MENU button to enter Menu mode.
2. Press and hold down the MENU button, and
press the button until the TUNER category
indicator appears.
3. If you want to calibrate the tuner (modify the
standard pitch), press the
Calibration page (CALIB) appears, then press the
+ or ‐ button to modify the value. (The default
setting is 440 Hz.)
4. Press the or
the musical instrument that you wish to tune.
Select the GUITAR page to tune a guitar, the
BASS page to tune a bass guitar, and the
CHROM page for other instruments.
5. Play a single note on your musical instrument.
The unit displays the name of note that is closest
to the pitch the unit recognizes.
If you are tuning a guitar or bass guitar, press the
+ or ‐ button to select the string number indicator
that matches the string you are tuning.
6. Play a single note and tune the instrument so that
an arrow and bars appear in the center of the
meter. If the pitch is low, the bars appear on the
left side. If the pitch is high, the bars appear on
the right side.
To stop the tuner operation, press the MENU button
to exit Menu mode. Alternatively, press and hold
down the MENU button, and press the
button to display a page in a different category.
24
button until the
button to access the page for
Touch slider
or