Korg littleBits i36 Quick Start Manual

A sequencer allows a musician to choose a series of notes and play them whenever they want. You
can step through the notes one at a time using a type of controller called a trigger, or you can set
the notes to play over and over again in a pattern.
Battery / p1 Power
Speed - to choose how fast the pitches will cycle through
Clock - to choose step (using a trigger) or speed (repeating)
Knobs - to choose pitches or silence

A Repeating Pattern.

Set the clock switch on the micro sequencer to "speed." When you switch on the power, four notes
will begin to play, one after the other. The LED lights tell you which note is playing. Turn one of the
micro sequencer's knobs all the way down (left - counterclockwise) to create a silent pulse.
Explore some patterns of notes and silences. Explore different speeds.
What happens when you replace the oscillator with the random module set to noise? What does
turning the sequencer's knobs up and down do to the sound?
i36 Micro Sequencer
Clock
Speed
Micro Sequencer (i36)
i31 Oscillator
Tune Pitch Square
Volume
Dial Knob /Saw
Tune dial - to match other instruments exactly
Pitch Knob - to make higher and lower sounds
Square/Saw - to choose between two kinds of sound
Volume - to make the sound louder and softer
LESSON 007
024 Speaker