Turning The Power On Or Off; Setting The Current Date And Time - Korg Sound on Sound Owner's Manual

Turning the Power On or Off

Before connecting the unit to another device, be sure to turn down the
volume of the unit as well as the other device, and turn the unit off to
prevent malfunction or damage to the speakers.
1. To turn on the power to the unit, press and hold
down the power button until the display turns on.
2. To turn off the power to the unit, first make sure
that playback or recording is stopped, then press
and hold down the power button until the unit
displays the PWR OFF dialog.
3. Press the button to turn the power off. If you
decide NOT to turn the power off, press the
button.
Be sure to follow the steps described above to turn
off the power to the unit.

Setting the Current Date and Time

Before you start recording, set the internal clock.
The date and time set here will be used to time‐
stamp recorded songs.
1. When you turn on the power to the unit for the
first time, the unit will display "CLOCKINI."
2. Press the button.
3. The year field will flash. Press the + or ‐ button to
set the year.
Only the last two digits of the year are displayed.
The first two digits are fixed to "20XX."
4. After setting the year, press the
5. The month field will flash. Press the + or ‐ button
to set the month.
6. Press the button to move through the setting
items, and use the + and ‐ buttons to set the day,
hour, minute, and second values.
7. Press the button to confirm the date and time
settings.
If you want to cancel the settings, press the Stop button.
To set the date and time later, access the DATE page in the MISC category
in Menu mode (see page 43).
If you remove the batteries or if the batteries in the unit have been
exhausted for a while (about three days) after you set the date and
time, the internal clock will be reset to the default setting.
8
button.