Menu Mode
Press the MENU button to enter Menu mode. In this mode, you can select
a category, parameter, set the parameters, and execute functions.
Basic Operation in Menu Mode
Selecting a category
Selecting a parameter
Setting a value
List of Categories, Pages, and Parameters
• Underscored values in the Parameter/Setting range column represent
the default setting.
• Column M indicates the location where data is stored: Location "B"
refers to the global (common) location in the unit; Location "S" indi‐
cates a song.
• Column PR indicates whether or not the corresponding parameter can
be modified or viewed:
"P" means you can modify and view the parameter only during play‐
back or in Record Ready mode. "p" means you can view the parameter
only during playback or in Record Ready mode.
"R" means you can modify and view the parameter during recording.
"r" means you can view the parameter only during recording.
Category
Page
Parameter/
Setting range
INPUT
LVL CTRL
MANUAL, AUTO B Controls the input level.
LEVEL
0–60–100
LOW CUT
OFF, ON
TONE
LOW10–OFF–
HI10
N∙GATE
OFF, ON
While holding down the MENU button, press
the
,
, + or ‐ button.
Press the
or
Press the + or ‐ button.
If a frame is displayed around the bar graph
near the bottom of the LCD, you can set a value
by sliding your finger to the left or right on the
bar (touch slider).
M Description
B Adjusts the input level.
B Turns the low range cut on
and off.
B Adjusts the input tone.
B Turns the Noise Gate func‐
tion on and off.
button.
PR
PR
PR
PR
PR
PR
25