Korg Sound on Sound Owner's Manual page 35

the MIX BAL parameter. When this parameter is set to "OFF," you
can adjust the volume level of the rhythm machine using the play‐
back level adjustment for the MIX BAL parameter.
FX
In this category, you can set various parameters for
the built‐in effects.
TYPE
This parameter enables you to select the effect
type. This parameter page also enables you to
modify the FX EDIT 1 parameter setting by using
the touch slider (see "Selecting an effect and set‐
ting the effect parameters" on page 22).
FX EDIT 1
FX EDIT 2
These parameter pages enable you to set the
parameter for an effect program selected via the
TYPE parameter (see "Selecting an effect and set‐
ting the effect parameters" on page 22). The
parameter type on these pages varies depending
on the selected effect.
Some of the effect programs are applied only
when you touch the touch slider.
POSITION
This parameter specifies the effect insertion point.
INPUT:
The effect is applied to the input signal and the
effect sound is output. The effect sound is also
recorded in the recording file.
REC DRY:
The effect is applied to the input signal and the effect sound is output.
The dry sound (sound with no effect) is recorded in the recording file.
PLAY TRK:
The effect is applied to the playback sound. Playback sound with the
effect is recorded in the recording file.
MASTER:
The effect is applied to the master sound (that is a mix of the input and
playback sounds). The dry sound (sound with no effect) is recorded in
the recording track.
Touch slider
Touch slider
35