Checking The Current Input Signal - Kenwood RV-7000 Instruction Manual

Checking the current input
signal
The type and number of channels of the audio signal input can
be checked.
1
Press [DISPLAY].
The input signal names and the numbers of their channels
are displayed in scrollable format.
Example: Display with DTS 5.1-channel input
• After displaying the type of listen mode and its number of
input channels, the display will switch back to the input
source name.
• This function is not available when in Tuner source.
42
RV-7000/RV-6000/RA-5000
6 0 - 5 8 2 7 - 0 8 _ 0 0 _ E n . i n d d 4 2
Virtual Surround
(RV-7000/RV-6000)
Dolby Virtual Speaker
(RA-5000)
These modes allow you to enjoy surround sound even when you
connect only the front speakers.
1
Press [VIRTUAL] (remote control unit) or [VIRTUAL
SURROUND]/[DOLBY VIRTUAL SPEAKER] (main
unit).
Each press switches the mode as follows:
RV-7000/RV-6000 only
Display Setting
"VS ON" Sets Virtual Surround mode to "ON"..
"VS OFF" Sets Virtual Surround mode to "OFF"..
RA-5000 only
Display Setting
"DOLBY VS REF" Provides the virtual surround effect. This is the standard setting.
Provides the virtual surround effect with a wider expansion and
"DOLBY VS WIDE"
spatial feeling.
"DOLBY VS OFF" Sets Dolby Virtual Speaker mode to off
1 0 . 8 . 3 1 1 : 0 8 : 2 1 A M