Tuning Into A Radio Station - Kenwood RV-7000 Instruction Manual

Tuning into a radio station

This unit can store up to 40 stations in the memory and recall
them by easy operation.
Radio stations can be classified into Radio Data System stations
and other stations. To listen to or store Radio Data System stations
in the preset memory see <Using Radio Data System>.
Be sure to connect antennas to receive radio broadcasts. (See
<Connecting antennas> §.)
∞/5
1
Set the input source to TUNER.
2
Use [BAND] to select the broadcast band.
Each press switches the band as follows:
1 FM
2 AM
3
Use [AUTO/MONO] to select the tuning method.
Each press switches the tuning method as follows:
Setting Operation
Auto tuning The next station is tuned automatically.
Manual tuning Select a station manually.
Normally, set to "AUTO" (auto tuning). If the radio waves are
weak and there is a lot of interference, switch to manual
tuning. (With manual tuning, stereo broadcasts will be
received in monaural.)
6 0 - 5 8 2 7 - 0 8 _ 0 0 _ E n . i n d d 4 3
4
Use [TUNING 1/¡] to select the station.
"TUNED" lights when a broadcast is being received.
"ST" lights when a broadcast is being received in stereo.
• [MULTI CONTROL ∞/5] can also be use to select a
station.
∞/5
Indicator
"AUTO" lit
"AUTO" not lit
43
English
1 0 . 8 . 3 1 1 : 0 8 : 2 3 A M