Table of Contents
Advertisement
Adjusting the sound
∞/5
ACTIVE EQ mode
ACTIVE EQ mode
The optimum acoustic field effect can be selected according to
the purpose of playback.
1
Press [ACTIVE EQ].
Each press switches the mode as follows:
Display
Setting
"A-EQ MUSIC"
Effective when listening to music.
"A-EQ CINEMA"
Effective when watching a movie.
"A-EQ GAME"
Effective when playing a game.
"A-EQ OFF"
Active EQ function is off.
48
RV-7000/RV-6000/RA-5000
6 0 - 5 8 2 7 - 0 8 _ 0 0 _ E n . i n d d 4 8
Bass Boost
Bass Boost
The Bass Boost can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "STEREO",
and also ACTIVE EQ mode is set to "OFF".
1
Press [BASS BOOST].
Press the key once to select the maximum (+10) low
frequency emphasis setting.
TONE will automatically be turned ON.
To cancel
Press [BASS BOOST] again.
Adjusting the Tone
Adjusting the Tone
The tone level can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "STEREO",
and also ACTIVE EQ mode is set to "OFF".
1
Press [TONE].
2
Select whether or not the tone level is to be
adjusted.
Use [MULTI CONTROL ∞/5] to select "TONE ON" or "TONE
OFF".
[TONE]
Display
Setting
"TONE ON"
The tone level can be adjusted. Go to step 3 after setting.
"TONE OFF"
The tone level is not adjusted.
3
Adjust the level of "BASS" (low frequencies).
Use [MULTI CONTROL ∞/5] to adjust the level.
[TONE]
The level is adjusted from –10 to +10.
4
Adjust the level of "TREB" (high frequencies).
Use [MULTI CONTROL ∞/5] to adjust the level.
[TONE]
The level is adjusted from –10 to +10.
1 0 . 8 . 3 1 1 : 0 8 : 3 1 A M
Hide quick links:
Advertisement
Table of Contents
