Speaker Setup (Detailed Setup); Speaker Setup Flow; Speaker Configuration - Kenwood RV-7000 Instruction Manual

Audio-video control center
Table of Contents

Advertisement

Speaker setup (Detailed Setup)

The detailed settings allow you to enjoy full performance of the
receiver according to the environment of your listening room.
For creating the best listening environment, Kenwood
recommends to perform the setup at the listening position.

Speaker setup flow

Speaker setup flow
Speaker settings consist of 7 elements.
1
Enter the Detailed Setup mode.
[SETUP]
Use [MULTI CONTROL ∞/5] to select an item to set.
[SETUP]
Elements
Display

Speaker Configuration

"SP SETUP"
Speaker Level
"TESTTONE"
Speaker Distance
"DISTANCE"
Crossover
"CROSSOVER"
Low Frequency Effects
"LFE LVL"
Level
Lip Sync
"LIP SYNC"
Auto Power Save
"APS"
"EXIT"
2
Set each item.
See the followings for each setup item.
6 0 - 5 8 2 7 - 0 8 _ 0 0 _ E n . i n d d 2 9
Setting
Selects whether each speaker channel is
used or, if used, its size.
Selects the output level from each
speaker.
Selects the distance between each
speaker and the listening position.
Sets the lower limit of the bass
frequencies reproduced from the speakers
set to "NML" in the "SP SETUP". The
frequencies below the frequency set here
are distributed to other speakers (those
set to "LRG" and the subwoofer).
Selects the level of bass audio
enhancement.
Low Frequency Effect channel delivers
separate non-directional bass signals to
the subwoofer for more dynamic deep
bass sound effects.
Adjusts the deviation in time between
the video and audio.
Sets Auto Power Save ON/OFF.
Exits the Detailed Setup mode.
Speaker configuration
Speaker configuration
Select the use of each speaker and its size.
1
Enter the Detailed Setup mode.
[SETUP]
Use [MULTI CONTROL ∞/5] to select "SP SETUP".
[SETUP]
2
Select the use and size of each speaker.
Use [MULTI CONTROL ∞/5] to select the speaker and its
use or size.
[SETUP]
Repeat the above operations until all of the speakers
have been set up.
Settings of RV-7000
Speaker
Display
"SUBW ON"
Subwoofer
"SUBW OFF"
"FRNT LRG"
Front speaker
"FRNT NML"
"CNTR LRG"
Center speaker
"CNTR NML"
"CNTR OFF"
"SURR LRG"
Surround speaker
"SURR NML"
"SURR OFF"
"FH/SB FH"
Front Height/
Surround
"FH/SB SB"
Back speaker
"FH/SBOFF"
connection
"FH LRG"
Front Height
speaker
"FH NML"
"SB LRGX2"
"SB LRGX1"
Surround Back
speaker
"SB NMLX2"
"SB NMLX1"
"RMX ON"
Subwoofer
1
Re-mix*
"RMX OFF"
Setting
Subwoofer is connected.
Subwoofer is not connected.
Large size front speaker
Average size front speaker
Large size center speaker
Average size center speaker
Center speaker is not connected.
Large size surround speaker
Average size surround speaker
Surround speakers are not connected.
Front Height speaker is connected.
Surround Back speaker is connected.
Front Height/Surround Back speaker is
not connected.
Large size front height speaker is
connected. (7.1ch)
Average size front height speaker is
connected. (7.1ch)
Large size surround back speaker is
connected. (7.1ch)
Large size surround back speaker is
connected. (6.1ch)
Average size surround back speaker is
connected. (7.1ch)
Average size surround back speaker is
connected. (6.1ch)
Subwoofer re-mix is on.
Subwoofer re-mix is off.
Continued
29
English
1 0 . 8 . 3 1 1 : 0 8 : 0 0 A M

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rv-6000Ra-5000

Table of Contents