Table of Contents
Advertisement
Adjustments according to the playing source
Speaker level adjustment
Speaker level adjustment
The output level from the desired speaker channels can be fine
adjusted according to the properties of each source.
The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value
when the power is turned on/off or when the input selection is
changed.
1
Press [SOUND] repeatedly to select the speaker to
adjust.
2
Use [MULTI CONTROL ∞/5] to adjust the level.
3
Repeat steps 1 and 2 to adjust the level of other
speakers.
Input level adjustment
Input level adjustment
¶ Analog source only
If the input level of an analog source signal is too high, the CLIP
indicator will light to indicate. Adjust the input level.
1
Press [SOUND] repeatedly to select "INPUT".
2
Use [MULTI CONTROL ∞/5] to adjust the input
level.
50
RV-7000/RV-6000/RA-5000
6 0 - 5 8 2 7 - 0 8 _ 0 0 _ E n . i n d d 5 0
Midnight mode
Midnight mode
¶ Dolby TrueHD, Dolby Digital Plus/Dolby Digital and DTS-HD/
DTS mode only
When watching movies at night, you might not be able to raise
the volume as loud as normal. Midnight mode compresses the
dynamic range of previously specified heavy sound passage of
the Dolby TrueHD, Dolby Digital Plus/Dolby Digital and DTS-
HD/DTS mode sound track (like scenes with sudden increases
in volume) to minimize the difference in volume between the
scenes with heavy sound passage and scenes with normal sound
passage. This makes it easy to hear all of the sound track, even
when listening at low volumes.
1
Press [SOUND] repeatedly to select "MIDNIGHT".
2
Use [MULTI CONTROL ∞/5] to select "AUTO" or
"ON" or "OFF".
Display
Setting
"AUTO"
Switches the Midnight mode automatically.
"ON"
Midnigt mode is on.
"OFF"
Midnigt mode is off.
• Some Dolby TrueHD, Dolby Digital Plus/Dolby Digital and
DTS-HD/DTS software may not be compatible with the
Midnight mode.
• "AUTO" can be selected only in the TrueHD mode.
Panorama mode (RV-7000/RV-6000 only)
Panorama mode (RV-7000/RV-6000 only)
¶ Pro Logic IIx Music and Pro Logic II Music mode only
The acoustic field of the front channels can be expanded till the
field of surround channels, which makes it possible to create
sound expansion in the front of the listener.
1
Press [SOUND] repeatedly to select "PANORAMA".
2
Use [MULTI CONTROL ∞/5] to select "ON" or "OFF".
Display
Setting
"ON"
PANORAMA mode is on.
"OFF"
PANORAMA mode is off.
1 0 . 8 . 3 1 1 : 0 8 : 3 5 A M
Hide quick links:
Advertisement
Table of Contents
