Speaker Level - Kenwood RV-7000 Instruction Manual

Speaker setup (Detailed Setup)
Settings of RV-6000
Speaker Display
"SW/SB SW"
Subwoofer/
Surround "SW/SB SB"
Back speaker
connection "SW/SBOFF"
"SUBW ON"
Subwoofer
"SUBW OFF"
"FRNT LRG"
Front speaker
"FRNT NML"
"CNTR LRG"
Center speaker "CNTR NML"
"CNTR OFF"
"SURR LRG"
Surround speaker "SURR NML"
"SURR OFF"
"SB LRG"
Surround Back
speaker "SB NML"
"SB OFF"
"RMX ON"
Subwoofer
Re-mix* 1
"RMX OFF"
Settings of RA-5000
Speaker Display
"SUBW ON"
Subwoofer
"SUBW OFF"
"FRNT LRG"
Front speaker
"FRNT NML"
"RMX ON"
Subwoofer
1
Re-mix*
"RMX OFF"
1
* Mixes the bass tone of other channels to the subwoofer
channel.
3
Go to the next setting.
• Reference for speaker size
"LRG"(Large) :
"NML"(Normal) :
If you cannot identify the size of a speaker, it is
recommended to set it to "NML".
• When "SUBW OFF" is selected, the front speakers are
automatically set to "FRNT LRG".
• For "FRNT LRG" selection, no sound will be heard from
subwoofer even it is set to ON. If you set the Subwoofer
Remix to "RMX ON", you will be able to hear sound from
the subwoofer.
• If "FRNT NML" is selected, "LRG" cannot be selected for the
other speakers.
30
RV-7000/RV-6000/RA-5000
6 0 - 5 8 2 7 - 0 8 _ 0 0 _ E n . i n d d 3 0
Setting
Subwoofer is connected.
Surround Back speaker is connected.
Subwoofer/Surround Back speaker is not
connected.
Subwoofer is connected.
Subwoofer is not connected.
Large size front speaker
Average size front speaker
Large size center speaker
Average size center speaker
Center speaker is not connected.
Large size surround speaker
Average size surround speaker
Surround speakers are not connected.
Large size surround back speaker is
connected. (6.1ch)
Average size surround back speaker is
connected. (6.1ch)
Surround back speaker is not connected.
Subwoofer re-mix is on.
Subwoofer re-mix is off.
Setting
Subwoofer is connected.
Subwoofer is not connected.
Large size front speaker
Average size front speaker
Subwoofer re-mix is on.
Subwoofer re-mix is off.
A speaker with a sufficient bass
reproduction capability (a speaker
with a large woofer or a large cabinet
size).
A speaker with a lower bass
reproduction capability than the
"LRG" speakers (the bass frequencies
will be output from the speakers set
to "LRG" and the subwoofer).
• If "SURR OFF" is selected, no surround back speaker can
be selected.
• If "SURR NML" is selected for surround speakers, "SB LRG"
cannot be selected for the surround back speaker and
"FH LRG" cannot be selected for the front height speaker.

Speaker Level

Speaker Level
Adjust the volume level of the speakers so that all of them are
approximately identical.
1
Select "TEST TONE".
[SETUP]
[MULTI CONTROL ∞/5]
[SETUP]
2
Select the test tone output method.
[MULTI CONTROL ∞/5]
[SETUP]
Display Setting
The test tone is heard from the speakers one after another with
"AUTO"
2 seconds each.
You can select the speaker channel from which the test tone
"MANUAL"
is output.
3
Adjust the volume level of each speaker.
If you select "AUTO" :
When you hear the test tone from the speaker which you
wish to adjust, use [MULTI CONTROL ∞/5] and adjust the
volume of the test tone. When you finish adjusting, press
[SETUP].
If you select "MANUAL" :
Use [MULTI CONTROL ∞/5] to adjust its volume level and
press [SETUP]. You will hear the test tone from the next
speaker.
The level is adjusted from -10dB to +10dB in1dB step
decrements.
4
Go to the next setting.
1 0 . 8 . 3 1 1 : 0 8 : 0 2 A M