Printing Test - Roland FJ-50 User Manual

2 Basic Operation

2-5 Printing Test

Before starting to print, carry out a printing test to check the state of the head.
Problems such as missing dots may reduce the printing quality.
If the test results show a problem, carry out head cleaning to restore the head to its normal state.
1
Load a material, then close the front cover.
2
Press the [CLEANING] key to execute [TEST PRINT].
Press the
HEAD CLEANING
START
HEAD CLEANING
TEST PRINT
22
key
Press the [ENTER] key,
head cleaning starts.
Press the [ENTER] key to
print a test pattern.
If there are any missing dots or other evidence
of a drop in printing quality, clean the head
(see "3-3 Cleaning the Printing Heads").