Table of Contents
Advertisement
2 . OPERATION FLOWCHART
Preparation for sewing
Turn ON the switch
Insert the CompactFlash
card
Select the sewing pattern
to be sewn
Place the sewing cassette
Place the material on the
sewing cassette
Place the sewing cassette in
the auto-ejector
Check that the sewing cas-
sette is securely clamped
Confirm the pattern shape
Display the sewing screen
and press SET READY key
Display the step sewing screen
Press the FEEDING FRAME
FORWARD button to check
the needle entry points
After the confirmation of the
pattern, press the CANCEL
button to return the screen to
the sewing screen.
Press the TWO-HAND
CONTROL START switch
One cycle operation of the
sewing machine is completed
To re-place the sewing cassette,
press the UNCLAMP switch
To re-check, press the
FEEDING FRAME
BACKWARD button to
re-check the needle entry
points.
Sewing
The sewing machine feed mech-
anism is driven
Stop
Thread trimming
Auto-ejector unclamp jig is
jumped out
– 18 –
To change the sewing pattern
Display the data
display screen
Call the sewing
shape selection screen
Select the target type
of sewing shape
When thread breakage occurs or
the bobbin thread has run out
The sewing machine
stops and the alarm
sounds
Press the RESET
button
Press the THREAD
TRIMMING button
Press the FEED BACK-
WARD button to return
the feeding frame to the
points to be re-sewn
Eliminate the
cause
The error is
reset
FEED BACK-
WARD button
is displayed
Advertisement
Table of Contents
