Amount Of Oil Supplied To The Hook; Replacing The Fuse; Changing The Voltage Of 100 ⇔ 200V; Replenishing The Designated Places With Grease - JUKI AMS-224EN6060/IP-420 Instruction Manual

1-10. Amount of oil supplied to the hook

Refer to "III-1-10. Amount of oil supplied to the hook" p.108
the AMS-224EN.

1-11. Replacing the fuse

Refer to "III-1-11. Replacing the fuse" p.108
1-12. Changing the voltage of 100 ⇔ 200V
"III-1-12. Changing the voltage of 100 ⇔ 200V" p.109
Refer to
the AMS-224EN.

1-13. Replenishing the designated places with grease

"III-1-13. Replenishing the designated places with grease" p.110 , "(1) Points to
Refer to
be applied with JUKI Grease A" p.111
p.112 in the Instruction Manual for the AMS-224EN.
(3)

(3) Points of the feed gear section to be applied with grease

(4)
in the Instruction Manual for
in the Instruction Manual for the AMS-224EN.
and "(2) Points to be applied with JUKI Grease B"
When the sewing machine has run out of grease,
apply grease to the points marked with arrows
shown below.
Running the sewing machine with no
grease can cause the sewing machine
failure and noise.
– 16 –
in the Instruction Manual for
Rack
Pinion