Advertisement
Precautions to be taken so as to use
1. Neither open the pulley cover nor touch the parts inside the pulley cover with the power re-
mained on in order to prevent accidents due to electrical shock.
1. Do not operate the sewing machine with the pulley cover and the finger guard removed in
order to protect against personal injury.
2. Neither place fingers, hair and/or clothes nor put anything in the area near the thread take-up
lever while the sewing machine is in operation in order to protect against personal injury due
to entanglement.
3. Keep fingers away from the thread take-up cover and the needle when turning the power on in
order to protect fingers and hands against injury.
4. To avoid personal injury, turn OFF the power switch when you tilt the machine head.
5. The hook rotates at a high speed while the machine is in operation. To prevent possible injury
to hands, be sure to keep your hands away from the vicinity of the hook during operation. In
addition, be sure to turn OFF the power to the machine when replacing the bobbin.
6. So as to avoid personal injuries caused by abrupt start of the machine, turn OFF the pow-
er switch and ascertain that the sewing machine does not run even if the starting pedal is
depressed when performing such works as inspection or adjustment of the sewing machine,
cleaning, threading, replacing the needle, etc.
7. In the case of adding oil to the sewing machine while it is energized, do not place your hands
into the moving parts for the sake of safety.
8. So as to avoid electrical shock hazards, do not operate the machine with the power supply
earth wire removed.
9. So as to avoid electrical shock hazards and accidents caused by damaged electrical compo-
nents, be sure to turn OFF the power switch before inserting/detaching the power plug.
10. So as to avoid personal injuries caused by abrupt start of the machine, turn OFF the power
switch when leaving the sewing machine table.
11. So as to avoid personal injuries caused by abrupt start of the machine, turn OFF the power
switch when the electricity fails.
12. To prevent fires, periodically draw out the power plug from the plug socket and clean the root
of the pins and the space between pins.
13. The motor does not produce noise while the machine is at rest. To avoid possible accidents
due to abrupt start of the machine, be sure to turn OFF the power to the machine.
14. Be careful of handling this product so as not to pour water or oil, shock by dropping, and the
like since this product is a precision instrument.
15. In a domestic environment this product may cause radio interference, in which case the user
may be required to make corrective actions.
CAUTION :
To avoid malfunction and damage of the machine, confirm the following.
• Clean the sewing machine thoroughly before using it for the first time.
• Remove all dust collected on the sewing machine during the transportation.
• Confirm that the voltage and phase are correct.
• Confirm that the power plug is properly connected.
• Never use the sewing machine in the state where the voltage type is different from the designated one.
• The direction of rotation of the sewing machine is counterclockwise as observed from the handwheel side.
Be careful not to rotate it in reverse direction.
• Do not tilt the machine head toward this side since oil leakage or parts breakage occurs.
• A safety switch is installed so that the sewing machine cannot be operated with the machine head tilted.
• When operating the sewing machine, turn ON the power switch after properly setting the head on the table.
• Before starting a test run, remove the bobbin case and the needle thread from the machine.
• Operate the handwheel after the sewing machine has totally stopped.
the LZ-2290C Series more safely
CAUTION BEFORE OPERATION
v
Advertisement
