JUKI AC-172NN-1790 Instruction Manual page 53

@5
@6
#3 #4
− 49 −
Returning the needle entry
2
When you press BACKWARD key
work clamp check s moved backward by one
sttch from the current poston. When you press
FORWARD key
s moved forward by one sttch from the current
poston.
When you press MATERIAL RIGHTWARD
FEED #4 , the current needle entry pont
of the sewng data s brought rghtward by one
needle entry pont. When you press MATERIAL
LEFTWARD FEED
pont of the sewng data s brought leftward by
one needle entry pont.
Return the work clamp check to the poston to
start re-sewng.
Starting sewing
3
When you press the knee swtch or the hand
swtch (ether swtch whch has been set as
the start swtch), the sewng machne starts re-
sewng.
" @-2-15. Method of changing mem-
* Refer to
ory switch data" p.77
swtch.
In order to re-sew the material after hav-
ing taken it out from the sewing machine,
it is necessary to move the carriage for-
ward by means of the MATERIAL RIGHT-
WARD #4 /LEFTWARD FEED
until the sewing end is reached.
@6 , the
@5 , the work clamp check
#3 , the needle entry
for how to set the start
#3